e 3 ds17002 rev. 9 - 2 1 of 3 df15005s-df1510s www.diodes.com diodes incorporated characteristic symbol df 15005s df 1501s df 1502s df 1504s df 1506s df 1508s df 1510s unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 580 700 v average forward rectified current @ t a = 40 c i o 1.5 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load i fsm 50 a forward voltage (per element) @ i f = 1.5a v fm 1.1 v peak reverse current at rated @ t a = 25 c dc blocking voltage (per element) @ t a = 125 c i rm 10 500 a i 2 t rating for fusing (t<8.3ms) i 2 t 10.4 a 2 s typical total capacitance per element (note 1) c t 25 pf typical thermal resistance, junction to ambient (note 2) r ja 40 c/w operating and storage temperature range t j ,t stg -65 to +150 c df15005s - df1510s 1.5a surface mount glass passivated bridge rectifier case: df-s case material: molded plastic. ul flammability classification rating 94v-0 moisture sensitivity: level 1 per j-std-020c terminals: finish - tin. solder plated leads, solderable per mil-std-202, method 208 polarity: as marked on case marking: type number, see page 3 weight: 0.38 grams (approximate) mechanical data notes: 1. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 2. thermal resistance, junction to ambient, measured on pc board with 5.0mm 2 (0.03mm thick) land areas. 3. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7. glass passivated die construction low forward voltage drop, high current capability surge overload rating to 50a peak designed for surface mount applications ul listed under recognized component index, file number e94661 lead free finish, rohs compliant (date code 0532+) (note 3) single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified a b c d e g h j l k df-s dim min max a 7.40 7.90 b 6.20 6.50 c 0.22 0.30 d 0.076 0.33 e 10.40 g 1.02 1.53 h 8.13 8.51 j 2.40 3.40 k 5.00 5.20 l 1.00 1.20 all dimensions in mm features
ds17002 rev. 9 - 2 2 of 3 df15005s-df1510s www.diodes.com 0.01 0.1 1.0 10 0.4 0.6 0.8 1.0 1.2 1.4 i , instantaneous forward current (a) f v , instantaneous forward voltage (v) fi g .2 t y p forward characteristics ( per element ) f 0 10 20 30 40 50 60 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 max non-repetitive peak forward sur g e current single half-sine-wave 1 10 100 1 10 100 c , capacitance (pf) t v , reverse voltage (v) fi g .4 t y p total capacitance ( per element ) r t = 25c f = 1.0 mhz v = 50 mv p-p j sig 0.01 0.1 1.0 10 100 20 04060 80 100 120 140 percent of rated peak reverse voltage (%) fi g .5 t y p reverse characteristics ( per element ) t = 125c j t = 25c j 1.0 0.5 0 40 60 80 100 120 140 i , average forward current (a) o t , ambient temperature (c) fi g . 1 output current deratin g curve a 60 hz resistive or inductive load 1.5 2 . 0
ds17002 rev. 9 - 2 3 of 3 df15005s-df1510s www.diodes.com ordering information (note 4) device packaging shipping df15xxxs-t df-s 1500/tape & reel df15xxxs df-s 50 per tube notes: 4. for packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. = manufacturers? code marking df15xxxs = product type marking code, ex: df1510 s yww = date code marking y = last digit of year ex: 2 for 2002 ww = week code 01 to 52 xxxx df15xxxs marking information important notice life support diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes witho ut further notice to any product herein. diodes incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. the user of products in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on our website, harmless against all damages. diodes incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written appr oval of the president of diodes incorporated.
|
